Amphetamine Sulfate Powder, and Addy Press Supplier needed ASAP

[peptides]

Now that Whitelist is no longer with us, I am trying to find a supplier with Amph Sulfate powder. I was able to get an oz from WL for $650 consistently, until his suppliers started giving him problems. I have over 100 customers waiting for me to find a new supplier, but as of now all the suppliers on the board are selling AS for ridiculously high prices.

I have a few orders I am waiting on from distributers in the EU I found on TOR sites, but those are always hit or miss.
Does anyone know of a domestic supplier with reasonable prices?

Additionally, I also have almost the same amount of customers waiting for Addy Presses, the ones Whitelist sold were great. I have tried/tested quite a few suppliers on the board and the presses are less than to be desired.

Does anyone know of a good supplier of the presses, Whitelist had presses that had 80mg Amp Sulf with 5mg m3tH. They were a big hit. If anyone knows of a source, please let me know. I thought I would have found one by now, but unfortunately I have not. I am more than willing to place an order for 100 and provide the supplier with a Fedex or UPS overnight tag, so that they only have to drop of the pack. For our website we can see that customer on average are waiting 4-7 days for USPS priority, and in some cases longer. That is too long, so we would be more than happy to simplify the shipping process by sending the prepaid shipping tag.

Sincerely appreciate any help anyone can offer.

 

[rhodium]

hello! We have meth free amph aulphate at over 96% purity without any nasties in our menu:
rentry.co/rhodiumrcusa2
rhodiumrc2@protonmail.com

We can overnight for an added cost. Ask for labwork!

 

[I_Main_Soraka]

Now that Whitelist is no longer with us, I am trying to find a supplier with Amph Sulfate powder. I was able to get an oz from WL for $650 consistently, until his suppliers started giving him problems. I have over 100 customers waiting for me to find a new supplier, but as of now all the suppliers on the board are selling AS for ridiculously high prices.

I have a few orders I am waiting on from distributers in the EU I found on TOR sites, but those are always hit or miss.
Does anyone know of a domestic supplier with reasonable prices?

Additionally, I also have almost the same amount of customers waiting for Addy Presses, the ones Whitelist sold were great. I have tried/tested quite a few suppliers on the board and the presses are less than to be desired.

Does anyone know of a good supplier of the presses, Whitelist had presses that had 80mg Amp Sulf with 5mg m3tH. They were a big hit. If anyone knows of a source, please let me know. I thought I would have found one by now, but unfortunately I have not. I am more than willing to place an order for 100 and provide the supplier with a Fedex or UPS overnight tag, so that they only have to drop of the pack. For our website we can see that customer on average are waiting 4-7 days for USPS priority, and in some cases longer. That is too long, so we would be more than happy to simplify the shipping process by sending the prepaid shipping tag.

Sincerely appreciate any help anyone can offer.

Sorry you haven't received much feedback on this yet!

If you haven't already found a vendor, I definitely recommend you to @iamgroot for any Amphetamine-based products in general. In my past experience, Groot is absolutely amazing! Very efficient with ordering and shipping process, has excellent & responsive customer service which is friendly and professional, and their products are absolutely legitimate and high quality.

I have my own active Rx for Adderall 20mg X3/Day for ADHD-C. @iamgroot took care of me at a time when my insurance decided they aren't going to pay for that, and I needed a cost effective way to just get through until it got approved.

I'm very picky about my Adderall, having been on it for 11 years now after trying literally every other ADHD med. I can tell you that Groot has the good stuff - I've felt no difference from my pharmacy RX, other than Groot's actually works even better lol.

They have an inclusive menu which, as of today, lists Amph sulfate powder, along with several different purely Amphetamine-based presses, Rx brand name pills (refer to the online menu for pricing). Also, off-menu items can be inquired about directly to Groot's email.

Also, @iamgroot if I've stepped on your toes in any way with this reply, please let me know and I can take it down. Just wanted to spread the good word.

Be safe, OP!

 

[Pinkelephant]

Now that Whitelist is no longer with us, I am trying to find a supplier with Amph Sulfate powder. I was able to get an oz from WL for $650 consistently, until his suppliers started giving him problems. I have over 100 customers waiting for me to find a new supplier, but as of now all the suppliers on the board are selling AS for ridiculously high prices.

I have a few orders I am waiting on from distributers in the EU I found on TOR sites, but those are always hit or miss.
Does anyone know of a domestic supplier with reasonable prices?

Additionally, I also have almost the same amount of customers waiting for Addy Presses, the ones Whitelist sold were great. I have tried/tested quite a few suppliers on the board and the presses are less than to be desired.

Does anyone know of a good supplier of the presses, Whitelist had presses that had 80mg Amp Sulf with 5mg m3tH. They were a big hit. If anyone knows of a source, please let me know. I thought I would have found one by now, but unfortunately I have not. I am more than willing to place an order for 100 and provide the supplier with a Fedex or UPS overnight tag, so that they only have to drop of the pack. For our website we can see that customer on average are waiting 4-7 days for USPS priority, and in some cases longer. That is too long, so we would be more than happy to simplify the shipping process by sending the prepaid shipping tag.

Sincerely appreciate any help anyone can offer.

I miss white list so much. I've also been looking for a new vendor with presses as great as his were and those unbeatable prices but no such luck. @PHX may be able to help locate

 

[rhodium]

What is your target price per domestic ounce? I’ll see if this can work

 

[iamgroot]

I miss white list so much. I've also been looking for a new vendor with presses as great as his were and those unbeatable prices but no such luck. @PHX may be able to help locate

Please email us at Grootplayer@protonmail.com.
May be I can offer you some good discounts.

 

[Sexyshrek]

For presses the DNM’s are your best bet, DYOR but if you want a couple recommendations DM me.

Hate to burst the bubble, but 99% of the time a vendor advertises some really specific mix like that, they’re either knowingly bullshitting you or believing a line from their own sources and piping it on down the supply chain. WL always seemed like a pretty legit dude, so I’d like to believe that with him it was the latter. But who the hell knows.. at the end of the day you can’t really trust anybody in this game.

I can tell you that I had grabbed a pack of these from WL a while back, and while I didn’t have any reagent tests on hand at the time, I did have a couple of OTC piss tests (multi panel, the kind that distinguish amp and m-amp)… and I popped for m-amp only.

Specifically with adderall presses, the notion of ‘specialty presses’ falls apart when you start to work down the logical rabbit hole. The traditional pills, pressed with meth, are probably made in the same Mexi-labs where they’re pumping out cartel ice… with the manufacturing and supply chain components locked in, they can likely produce fake addy’s for… fuck, a couple cents apiece…? Honestly the filler is probably the most expensive ingredient. Calculating based on street level consumer prices: on the DNM’s, if you know who to deal with, even with low level bulk purchasing of less than an oz, you can get the standard crank for like $8/g. That breaks out to less than a penny per milligram. Even a 30mg pill in that case would only require 24 cents worth of dope. Again as a low level end consumer, even the really good product can be had for $20-$25/g, in which case the same strength would still only equate to somewhere between 60 and 75 cents of active ingredient (remember, these are end users price points too, so the ppl manufacturing them are footing a fraction of these costs).

Forgive the rambling hehe - the point is, I’m probably 98% of scenarios where these pills are being produced, there is just no utility or ROI for the producers to include active ingredients other than regular ole meff… especially since, as I understand it, those other actives can be significantly harder to produce.

Likely the only time you might find presses actually containing this type of split would be if you had a direct line to a boutique chemist willing to go the extra mile (and obviously, the cost to produce would be much higher and ability to scale up much lower).

That said, IME when you can sniff out the true quality meff presses on the DNM’s, they feel ‘clean’ and could certainly pass for being a mixture like this…

 

[Mohawk]

For presses the DNM’s are your best bet, DYOR but if you want a couple recommendations DM me.

Hate to burst the bubble, but 99% of the time a vendor advertises some really specific mix like that, they’re either knowingly bullshitting you or believing a line from their own sources and piping it on down the supply chain. WL always seemed like a pretty legit dude, so I’d like to believe that with him it was the latter. But who the hell knows.. at the end of the day you can’t really trust anybody in this game.

I can tell you that I had grabbed a pack of these from WL a while back, and while I didn’t have any reagent tests on hand at the time, I did have a couple of OTC piss tests (multi panel, the kind that distinguish amp and m-amp)… and I popped for m-amp only.

Specifically with adderall presses, the notion of ‘specialty presses’ falls apart when you start to work down the logical rabbit hole. The traditional pills, pressed with meth, are probably made in the same Mexi-labs where they’re pumping out cartel ice… with the manufacturing and supply chain components locked in, they can likely produce fake addy’s for… fuck, a couple cents apiece…? Honestly the filler is probably the most expensive ingredient. Calculating based on street level consumer prices: on the DNM’s, if you know who to deal with, even with low level bulk purchasing of less than an oz, you can get the standard crank for like $8/g. That breaks out to less than a penny per milligram. Even a 30mg pill in that case would only require 24 cents worth of dope. Again as a low level end consumer, even the really good product can be had for $20-$25/g, in which case the same strength would still only equate to somewhere between 60 and 75 cents of active ingredient (remember, these are end users price points too, so the ppl manufacturing them are footing a fraction of these costs).

Forgive the rambling hehe - the point is, I’m probably 98% of scenarios where these pills are being produced, there is just no utility or ROI for the producers to include active ingredients other than regular ole meff… especially since, as I understand it, those other actives can be significantly harder to produce.

Likely the only time you might find presses actually containing this type of split would be if you had a direct line to a boutique chemist willing to go the extra mile (and obviously, the cost to produce would be much higher and ability to scale up much lower).

That said, IME when you can sniff out the true quality meff presses on the DNM’s, they feel ‘clean’ and could certainly pass for being a mixture like this…

I like your attention to detail fellow traveler. I too did an OTC piss test of WL product across several batches. All tests had panels for borh AMP & METH. When WL started his AMP paste was real and very enjoyable, clean AMP. I'd say that his powder tested for AMP throughout the first 2/3ds of his reign here. His presses were always only METH. Then somerhing horrible happened with his powder - it was not moist, had no reddish tint and was starkly different than all prior batches. It didn't test positive for AMP or METH. It had zero reinforcing qualities that would make you want to use it again. I'm assuming it was KU crystal or some other cathinone rubbish. I flushed it. I still went to him for meth presses, but never for powder.

 

[Tucker]

I like your attention to detail fellow traveler. I too did an OTC piss test of WL product across several batches. All tests had panels for borh AMP & METH. When WL started his AMP paste was real and very enjoyable, clean AMP. I'd say that his powder tested for AMP throughout the first 2/3ds of his reign here. His presses were always only METH. Then somerhing horrible happened with his powder - it was not moist, had no reddish tint and was starkly different than all prior batches. It didn't test positive for AMP or METH. It had zero reinforcing qualities that would make you want to use it again. I'm assuming it was KU crystal or some other cathinone rubbish. I flushed it. I still went to him for meth presses, but never for powder.

I have a question for a friend of mine.
She is in a program for taking Methadone cause she had a problem with opioids. She needs to do a urine test every week when she picks up her methadone from the clinic. They know she takes Cloanazepham for sleep and anxiety so obviously that will show up on her urine test. Her question is what are the chances if she starts taking addys to help her out , will these show up on her test she does? Or do they not test people for this type of medication when sampling. If you have any ideas about this that would be helpful. Thanks

 

[peekpop]

I have a question for a friend of mine.
She is in a program for taking Methadone cause she had a problem with opioids. She needs to do a urine test every week when she picks up her methadone from the clinic. They know she takes Cloanazepham for sleep and anxiety so obviously that will show up on her urine test. Her question is what are the chances if she starts taking addys to help her out , will these show up on her test she does? Or do they not test people for this type of medication when sampling. If you have any ideas about this that would be helpful. Thanks

it will show up, i get suboxone prescribed.

 

[scarred14]

For presses the DNM’s are your best bet, DYOR but if you want a couple recommendations DM me.

Hate to burst the bubble, but 99% of the time a vendor advertises some really specific mix like that, they’re either knowingly bullshitting you or believing a line from their own sources and piping it on down the supply chain. WL always seemed like a pretty legit dude, so I’d like to believe that with him it was the latter. But who the hell knows.. at the end of the day you can’t really trust anybody in this game.

I can tell you that I had grabbed a pack of these from WL a while back, and while I didn’t have any reagent tests on hand at the time, I did have a couple of OTC piss tests (multi panel, the kind that distinguish amp and m-amp)… and I popped for m-amp only.

Specifically with adderall presses, the notion of ‘specialty presses’ falls apart when you start to work down the logical rabbit hole. The traditional pills, pressed with meth, are probably made in the same Mexi-labs where they’re pumping out cartel ice… with the manufacturing and supply chain components locked in, they can likely produce fake addy’s for… fuck, a couple cents apiece…? Honestly the filler is probably the most expensive ingredient. Calculating based on street level consumer prices: on the DNM’s, if you know who to deal with, even with low level bulk purchasing of less than an oz, you can get the standard crank for like $8/g. That breaks out to less than a penny per milligram. Even a 30mg pill in that case would only require 24 cents worth of dope. Again as a low level end consumer, even the really good product can be had for $20-$25/g, in which case the same strength would still only equate to somewhere between 60 and 75 cents of active ingredient (remember, these are end users price points too, so the ppl manufacturing them are footing a fraction of these costs).

Forgive the rambling hehe - the point is, I’m probably 98% of scenarios where these pills are being produced, there is just no utility or ROI for the producers to include active ingredients other than regular ole meff… especially since, as I understand it, those other actives can be significantly harder to produce.

Likely the only time you might find presses actually containing this type of split would be if you had a direct line to a boutique chemist willing to go the extra mile (and obviously, the cost to produce would be much higher and ability to scale up much lower).

That said, IME when you can sniff out the true quality meff presses on the DNM’s, they feel ‘clean’ and could certainly pass for being a mixture like this…

Sorry if this is too general a question, but besides the pricey pharma add1s that some are offering, what do you suggest as an alternative? i find the same with the pre$$es, very hit or miss, some are just straight up strange... never done testing personally.

 

[Coopauto]

For presses the DNM’s are your best bet, DYOR but if you want a couple recommendations DM me.

Hate to burst the bubble, but 99% of the time a vendor advertises some really specific mix like that, they’re either knowingly bullshitting you or believing a line from their own sources and piping it on down the supply chain. WL always seemed like a pretty legit dude, so I’d like to believe that with him it was the latter. But who the hell knows.. at the end of the day you can’t really trust anybody in this game.

I can tell you that I had grabbed a pack of these from WL a while back, and while I didn’t have any reagent tests on hand at the time, I did have a couple of OTC piss tests (multi panel, the kind that distinguish amp and m-amp)… and I popped for m-amp only.

Specifically with adderall presses, the notion of ‘specialty presses’ falls apart when you start to work down the logical rabbit hole. The traditional pills, pressed with meth, are probably made in the same Mexi-labs where they’re pumping out cartel ice… with the manufacturing and supply chain components locked in, they can likely produce fake addy’s for… fuck, a couple cents apiece…? Honestly the filler is probably the most expensive ingredient. Calculating based on street level consumer prices: on the DNM’s, if you know who to deal with, even with low level bulk purchasing of less than an oz, you can get the standard crank for like $8/g. That breaks out to less than a penny per milligram. Even a 30mg pill in that case would only require 24 cents worth of dope. Again as a low level end consumer, even the really good product can be had for $20-$25/g, in which case the same strength would still only equate to somewhere between 60 and 75 cents of active ingredient (remember, these are end users price points too, so the ppl manufacturing them are footing a fraction of these costs).

Forgive the rambling hehe - the point is, I’m probably 98% of scenarios where these pills are being produced, there is just no utility or ROI for the producers to include active ingredients other than regular ole meff… especially since, as I understand it, those other actives can be significantly harder to produce.

Likely the only time you might find presses actually containing this type of split would be if you had a direct line to a boutique chemist willing to go the extra mile (and obviously, the cost to produce would be much higher and ability to scale up much lower).

That said, IME when you can sniff out the true quality meff presses on the DNM’s, they feel ‘clean’ and could certainly pass for being a mixture like this…

These are wise words and very much mirror my own views on almost any chemical substance acquired outside of a script filled by a regulated pharmacy. Personally I limit my purchases DNM or otherwise to Vendors that have been referred to me from others with more experience than I. I have used pretty much the same vendors today as I have for the past 10-12 years. Vendors do come and go. Some exit scam some legitimately decide to quit the trade. For this reason I still spend quite a lot of time around the DNM's around Forums, reading Vendor Reviews to make sure that if one of my vendors goes dark I have some alternatives to go to. I guess it is easier for a consumer who has no interest in trading product. I always advocate staying on top of what is going on with DNM's. There are some very reputable forums in DN that have been around for years that monitor activity within DNM's Stay Inquisitive and don't stop researching. If you are considering DNM's please follow the many guides in place that if followed keep you relatively safe. And if something looks to good to be true, guess what. Stay safe folks..

 

[rhodium]

I sell amfetamine sulfate in powder, meth free

 

[usermain940]

I sell amfetamine sulfate in powder, meth free

I was curious if you have current test results? I saw the one posted on your thread but that was from mid November. Have been wanting to order.

 

[rhodium]

its still the same mother batch made by the same chemist we didn’t sell all of it in one go

 

[gfunkster]

For presses the DNM’s are your best bet, DYOR but if you want a couple recommendations DM me.

Hate to burst the bubble, but 99% of the time a vendor advertises some really specific mix like that, they’re either knowingly bullshitting you or believing a line from their own sources and piping it on down the supply chain. WL always seemed like a pretty legit dude, so I’d like to believe that with him it was the latter. But who the hell knows.. at the end of the day you can’t really trust anybody in this game.

I can tell you that I had grabbed a pack of these from WL a while back, and while I didn’t have any reagent tests on hand at the time, I did have a couple of OTC piss tests (multi panel, the kind that distinguish amp and m-amp)… and I popped for m-amp only.

Specifically with adderall presses, the notion of ‘specialty presses’ falls apart when you start to work down the logical rabbit hole. The traditional pills, pressed with meth, are probably made in the same Mexi-labs where they’re pumping out cartel ice… with the manufacturing and supply chain components locked in, they can likely produce fake addy’s for… fuck, a couple cents apiece…? Honestly the filler is probably the most expensive ingredient. Calculating based on street level consumer prices: on the DNM’s, if you know who to deal with, even with low level bulk purchasing of less than an oz, you can get the standard crank for like $8/g. That breaks out to less than a penny per milligram. Even a 30mg pill in that case would only require 24 cents worth of dope. Again as a low level end consumer, even the really good product can be had for $20-$25/g, in which case the same strength would still only equate to somewhere between 60 and 75 cents of active ingredient (remember, these are end users price points too, so the ppl manufacturing them are footing a fraction of these costs).

Forgive the rambling hehe - the point is, I’m probably 98% of scenarios where these pills are being produced, there is just no utility or ROI for the producers to include active ingredients other than regular ole meff… especially since, as I understand it, those other actives can be significantly harder to produce.

Likely the only time you might find presses actually containing this type of split would be if you had a direct line to a boutique chemist willing to go the extra mile (and obviously, the cost to produce would be much higher and ability to scale up much lower).

That said, IME when you can sniff out the true quality meff presses on the DNM’s, they feel ‘clean’ and could certainly pass for being a mixture like this…

There are documentaries on mexican pill press labs that spread throughout 1000s of homes now. No longer using the main lab that they use for high quality M. I am only 40 years old but I can remember when the white product prices shot from low 20s in NYC to high 30s for many even more. I move a lot. M was in NY. More in the EDM or LGBTQ communities than anywhere else. Prices were and still are high but I remember when they dropped quality went up oddly enough. I dont know if this was coincidence. But you would always hear about labs getting busted or blowing up here. Not so much now. The term superM was being tossed around. It most likely was just the ability to get the right stuff to mass produce. I do believe some have amphetamine well I know bc my Urine Analysis gets broken down to each drug prescribed. Unfortunately for me my numbers just so happen to be high. It is what it is. But I had not used my script that entire 2 months. I believe our bodies convert amp and other drugs into M, mda, phentermine all show in assay. Fuck...getting off topic but there is domestic presses and there is a demand at level (small pharmacies is just one I'll mention nvm those who can't afford insurance). I know and even worked with companies where pharmacies exist within these places. There a whole game of pill swapping even at the pharmacy level. Those can't look bad and must at least look good which is why we see certain presses that are in use but we rarely get those like epic brand. The same goes for the other infamous 30mg drug which they will use weak pressed pills and swap them. Think about it...so I agree with you that probably 90 percent are M but I do believe the demand is high enough and Mexico/Chinas relationship would allow them or anyone else willing to fulfill this.

 

[Coldonazolam]

Please email us at Grootplayer@protonmail.com.
May be I can offer you some good discounts.

Groot is the real deal I can vouch for his products 100% been doing successful business with him for 6 months top notch product with an intelligent and responsive fair vendor just ordered his blue30 mags and couldn’t by happier with my reading experience

 

[Kray155]

Groot is the real deal I can vouch for his products 100% been doing successful business with him for 6 months top notch product with an intelligent and responsive fair vendor just ordered his blue30 mags and couldn’t by happier with my reading experience

I can vouch 150% on groot. Myself, I get Dexies prescribed having add and have been using groot for a little over 6 months and the strong adDi3e presses are what I get and have gotten mdma crystals before and they all tested good and he’s easy to get with. Stays in contact with you if you ask anything.

 

[scarred14]

anybody have a lead on someone with p0wd3r?

see a lot of paste, pr3$$ies and such, but really only one that has powd3r to the usa that is good, and he is on hiatus rn.

 

[LW815]

anybody have a lead on someone with p0wd3r?

see a lot of paste, pr3$$ies and such, but really only one that has powd3r to the usa that is good, and he is on hiatus rn.

I regularly see p0wd£r on See&See’s site but I think he runs out fast cause it’s never there long. pretty sure it’s cheaper than the few others I’ve seen as well. If you’re talking about R being MIA I believe he’s back, saw him post in thread today.

Also while I can’t vouch for them, I saw it listed on Art amiss’s page as well. I say I can’t vouch because they were here and gone before my time here, so I personally have no clue if it’s the same person. Not saying I think they are an imposter, I just don’t know enough about them to give an actual recommendation. I’d feel terrible if somebody got scammed because I told them about somebody who turned out not to be legit.