How to properly snort oxee

Michael.

Member
Joined
May 13, 2021
Messages
45
Again don’t know if this is the right place for this question but for experienced snorters what is the most effective way to get the most absorption through your nose?  I know not to snort too hard and to do smaller lines but does anybody have any tips or a guide would be greatly appreciated.  I’ve been snorting lightly and then rubbing my nose to get the powder to stick.  Is making it into a solution more effective? I feel like I get foo much drip when I snort.

 
@Michael Percson what i do:  Get some saline nose spray.  Do a spray in each nose and wait a minute, then blow your nose and clean it out real good.  this both cleans it so the powder adheres to your actual tissue and provides the slightest bit of moisture.  You dont want too wet and you dont want bone dry imo.  For large quantities i will break the lines up and space them out.  This prevents a heavy drip from trying to inhale a lot of material at once.  Inhales slowish.  You want it to get in there and not just on the tips of the hairs, but yeah you want it in the nasal passage not in your throat swallowing it.  I do the nostril squeeze as well.  Im good at just holding it there still and not sniffing, but drip is inevitable, just part of the body's response to a foreign substance.  Ive only done solutions for stuff im doing intranasal thats very small milligrams, so i have no experience with that with ox.  Hope this helps and hope others chime in with their techniques.  Love learning new styles.  Take care. 

 
Even the ones without the coating are pretty hard.  You can't cut it like other powdery stuff.  I take a very thick silver serving knife and I smash it nice and slow.  Otherwise, the pieces fly everywhere if you try to cut them or smash with a hammer.  I put my palm on the flat part of the knife and slowly turn it in half circles until you can get it as powdery as you can.  If there's any large blue pieces left, I try to take those out with a tweezers and make sure it's only white powder.  Then I get the razor blade and cut it to be as powdery as I can.  If the white chunks are too large, they will just fall out of your nose as soon as you inhale.  I make the lines only about an inch long and go up from there every 15 minutes to half an hour to see how it affects you.  I'm always surprised how much powder it makes.  Anyway, I do the same thing as @DoomKitty.  I clean w/nasal spray, inhale and pinch my nose shut for a few minutes.  Once it starts going down my throat for a bit, I rinse with nasal spray again.  Honestly, I've tried it with a few different opies and it's never better than just chewing them up and swallowing.  All the trouble is not worth the bit of a kick I get, but that's just me.  I'd like to have them affect me longer because I do have pain problems that I'd like some 6 hours of relief from.  Also, if you have a pair of clean gardening clippers and you hold the two sides carefully with your fingers of some of the pills that are coated or are really hard, it usually makes the cleanest break.     

 
Buy a pill grinder made to powderize pills. Then take a bill snd credit card and swipe the card repeatedly over the pill chunks covered by the dollar bill and then you should have fluff. I knew people who like using a hose clamp to grind the pills down into fine fluffy powder 

 
This is an old post but I thought I would throw in a little bit of my own experience. If you're going to get it from your local GP, tell them that you prefer it without Tylenol that Tylenol does not agree with you that way you can get just small little bitty pills that grind up really easily and there's no extraneous stuff to burn your nose. Just a little information that I ran across. Everybody stay safe be careful

B

 
Drugbuyersguide Shoutbox
  1. M @ Mammasboi123: @Logan1488 depends on your current 0p10d tolerance and how strong your 0pi DOC is that you’re trying to ween off of. Try checking out the info under the SR-17 thread under General Talk About Research Chemicals
  2. J @ jjjjjjjjj: Hope everyone is having a lovely Friday!
  3. A @ Anonmist: G
  4. tiquanunderwood @ tiquanunderwood: 5 year anniversary coming up, yeee boiii.
  5. tiquanunderwood @ tiquanunderwood: @necromedic and some of us quite awhile!
  6. tiquanunderwood @ tiquanunderwood: hope everyone's almost friday has been great!
  7. N @ necromedic: I come here and see compassion, generosity and community. You all make me feel like maybe humanity isn’t totally screwed. God’s blessings upon you all.
  8. J @ jjjjjjjjj: Hope everyone has had a good day today!
  9. xenxra @ xenxra: shadow wizard goblin insanity
  10. D @ DoctorBD: @peanut shout-out to you for making me aware of this! And all of you! Stay blessed and stay you!
  11. I_Main_Soraka @ I_Main_Soraka: Hiya all, just wishing everyone positive vibes and a happy day~ ^_^ 🥰
  12. P @ peanut: Hi everyone (example I was told by a mod).
  13. P @ peanut: The chat box is for shout outs not menu items, samples, asking for items.
  14. Telp @ Telp: @DoctorBD Nope lol
  15. C @ chaddbriggs: How do you initiate a dispute concerning a vendor
  16. A @ Aarfgh: I asked admins about the vendor menu thing, being right out in the open while we need to speak in code. they said there's no such rule for vendors. lol tf?
  17. tiquanunderwood @ tiquanunderwood: Thanks @iamgroot for the sample! <3
  18. B @ Bigfish529: Thanks ! @fyjclol
  19. F @ fyjclol: Some vendors are good about it though..
  20. F @ fyjclol: @luquitoad ive thought of that too, kinda pointless :LOL: somw
Back
Top