Hammerblow
Spammers
- Joined
- Mar 9, 2016
- Messages
- 479
How To Reconstitute hCG (Step-by-step guide w/Pictures!)
hCG is a peptide which is bought in powdered form. In order to inject this compound, it must be reconstituted through the use of either sterile water or bacteriostatic water. Both are acceptable re-constitutional ingredients, however the use of sterile water will see the hCG degrade at a faster rate than bacteriostatic water.
Preface
Assuming your vial of hCG is vacuum sealed (as many are), when you reconstitutie the hCG, withdraw your sterile water/bacteriostatic water then firmly hold the plunger of the syringe as you insert it through the stopper of the hCG vial. Don't let it suck the water from your pin. Turn the vial at a slight angle and slowly drip water down the side of the vial being sure not to shoot water directly at the powder. Your hCG should melt, if it fizzes up you've possibly just damaged the hormone. Do not shake the hCG, instead lightly swirl it and store it in a fridge and use for upto 30-40 days
Ingredients
1 x hCG Vial
Sterile Water or Bacteriostatic Water
1 x 1ml 29g 1/2" Needle (Insulin Needle)
Alcohol Swabs
Dosages
Working out dosages for hCG is simple.
+) If you have 5,000IU hCG in the vial, and 20ml of sterile/bacteriostatic water, reconstituting this will create 250IU/ml.
+) If you have 5,000IU hCG in the vial, and 10ml of sterile/bacteriostatic water, reconstituting this will create 500IU/ml.
+) If you have 5,000IU hCG in the vial, and 5ml of sterile/bacteriostatic water, reconstituting this will create 1,000IU/ml.
+) If you have 5,000IU hCG in the vial, and 2ml of sterile/bacteriostatic water, reconstituting this will create 2,500IU/ml.
+) If you have 5,000IU hCG in the vial, and 1ml of sterile/bacteriostatic water, reconstituting this will create 5,000IU/ml.
Step 1
Take the cap off the hCG vial, so that it is ready to be swabbed by an alcohol pad.
Step 2
Prepare Insulin Needle (1 x 1ml 29g 1/2" Needle).
Step 3
Use an alcohol swab to wipe the top of the hCG vial.
Step 4
Prepare Sterile Water/Bacteriostatic (Sterile water in this case) ampoule and identify cracking point.
Step 5
Crack ampoule.
Step 6
Withdraw water from the sterile water ampoule.
Step 7
Inject sterile water into the hCG vial, slowly and ensure the water does not come in direct contact with the powder, instead inject so that the water falls onto the side of the vial and hits the glass before it comes into contact with the powder - hCG alongside all peptides are very sensitive compounds.
Be very careful that there is no vacuum from the difference in pressure with the atmosphere and the pressure within the vial. To combat this, inject the amount (ml) into the vial before withdrawing that same amount (ml).
Step 8
Now either store the hCG in the fridge ready for consumption or inject subcutaneously).
hCG is a peptide which is bought in powdered form. In order to inject this compound, it must be reconstituted through the use of either sterile water or bacteriostatic water. Both are acceptable re-constitutional ingredients, however the use of sterile water will see the hCG degrade at a faster rate than bacteriostatic water.
Preface
Assuming your vial of hCG is vacuum sealed (as many are), when you reconstitutie the hCG, withdraw your sterile water/bacteriostatic water then firmly hold the plunger of the syringe as you insert it through the stopper of the hCG vial. Don't let it suck the water from your pin. Turn the vial at a slight angle and slowly drip water down the side of the vial being sure not to shoot water directly at the powder. Your hCG should melt, if it fizzes up you've possibly just damaged the hormone. Do not shake the hCG, instead lightly swirl it and store it in a fridge and use for upto 30-40 days
Ingredients
1 x hCG Vial
Sterile Water or Bacteriostatic Water
1 x 1ml 29g 1/2" Needle (Insulin Needle)
Alcohol Swabs
Dosages
Working out dosages for hCG is simple.
+) If you have 5,000IU hCG in the vial, and 20ml of sterile/bacteriostatic water, reconstituting this will create 250IU/ml.
+) If you have 5,000IU hCG in the vial, and 10ml of sterile/bacteriostatic water, reconstituting this will create 500IU/ml.
+) If you have 5,000IU hCG in the vial, and 5ml of sterile/bacteriostatic water, reconstituting this will create 1,000IU/ml.
+) If you have 5,000IU hCG in the vial, and 2ml of sterile/bacteriostatic water, reconstituting this will create 2,500IU/ml.
+) If you have 5,000IU hCG in the vial, and 1ml of sterile/bacteriostatic water, reconstituting this will create 5,000IU/ml.
Step 1
Take the cap off the hCG vial, so that it is ready to be swabbed by an alcohol pad.
Step 2
Prepare Insulin Needle (1 x 1ml 29g 1/2" Needle).
Step 3
Use an alcohol swab to wipe the top of the hCG vial.
Step 4
Prepare Sterile Water/Bacteriostatic (Sterile water in this case) ampoule and identify cracking point.
Step 5
Crack ampoule.
Step 6
Withdraw water from the sterile water ampoule.
Step 7
Inject sterile water into the hCG vial, slowly and ensure the water does not come in direct contact with the powder, instead inject so that the water falls onto the side of the vial and hits the glass before it comes into contact with the powder - hCG alongside all peptides are very sensitive compounds.
Be very careful that there is no vacuum from the difference in pressure with the atmosphere and the pressure within the vial. To combat this, inject the amount (ml) into the vial before withdrawing that same amount (ml).
Step 8
Now either store the hCG in the fridge ready for consumption or inject subcutaneously).
