Bromazolam new batch

B

bigblueallda

Member
Joined
Jun 14, 2023
Messages
360
Has anyone tried Auto's bromazolam in the past week or so. If so was it a white powder and dissolve into a solution very easily? If anyone has read this magazine do you think it is a good edition?
 
bigblueallda said:
Has anyone tried Auto's bromazolam in the past week or so. If so was it a white powder and dissolve into a solution very easily? If anyone has read this magazine do you think it is a good edition?
Click to expand...
My first subscription from him was exactly as you described and I encountered no problems. That was probably within the last 4 months of 2023.
 
iRRegularity said:
My first subscription from him was exactly as you described and I encountered no problems. That was probably within the last 4 months of 2023
Click to expand...
Thanks. I've ordered several times in the past and it has always been tan. Did the white batch you had dissolve super easy? I've just never had brom that goes into a solution so easy. And it sort of threw me off a bit. Thanks bro!
 
bigblueallda said:
Thanks. I've ordered several times in the past and it has always been tan. Did the white batch you had dissolve super easy? I've just never had brom that goes into a solution so easy. And it sort of threw me off a bit. Thanks bro!
Click to expand...
I believe it did, but I actually have some of around the lab still so I can whip up another solution and tell you. Were you using PG, ethanol, or both?
 
iRRegularity said:
I believe it did, but I actually have some of around the lab still so I can whip up another solution and tell you. Were you using PG, ethanol, or both?
Click to expand...
Just everclear/ethanol 190 proof. I made it into around 3mg/ml and it dissolved with no heat. It only took about 30 minutes and it is completely clear/not cloudy at all and you cannot see any powder on the bottom or anything. I just shook it up good. It even it smells the same as brom I've had in the past 3 years or so from diferent vendors and him. I've just never had brom dissolve without having to do heat baths and magnetic stirring and all that. That is what is throwing me off. If you could just make a small amount and let me know how it goes that would be awesome bro!
 
bigblueallda said:
Just everclear/ethanol 190 proof. I made it into around 3mg/ml and it dissolved with no heat. It only took about 30 minutes and it is completely clear/not cloudy at all and you cannot see any powder on the bottom or anything. I just shook it up good. It even it smells the same as brom I've had in the past 3 years or so from diferent vendors and him. I've just never had brom dissolve without having to do heat baths and magnetic stirring and all that. That is what is throwing me off. If you could just make a small amount and let me know how it goes that would be awesome bro!
Click to expand...
Oh I can say with absolute certainty I've never had to do a heat bath or anything beyond just shaking/agitation. I'm about to head to a BJJ class, but I'll try and whip up a quick solution afterwards and keep you posted. If not tonight, tomorrow after work for sure.
 
iRRegularity said:
Oh I can say with absolute certainty I've never had to do a heat bath or anything beyond just shaking/agitation. I'm about to head to a BJJ class, but I'll try and whip up a quick solution afterwards and keep you posted. If not tonight, tomorrow after work for sure.
Click to expand...
Thanks man. Just if you feel like it. Do you remember if it was crystal clear? Every batch of brom I've had in the past it was a bitch to make into solutions because it just wouldn't dissolve completely. I guess I'll find out soon enough lol.
 
bigblueallda said:
Has anyone tried Auto's bromazolam in the past week or so. If so was it a white powder and dissolve into a solution very easily? If anyone has read this magazine do you think it is a good edition?
Click to expand...
After all has been said and done (I reached out), I think we can just say that even though there does seem to be an inconsistency, that everything seems fine on that end. I'm actually quite content, so I'll leave it at that.
 
Last edited:
echo11 said:
After all has been said and done (I reached out), I think we can just say that even though there does seem to be an inconsistency, that everything seems fine on that end. I'm actually quite content, so I'll leave it at that.
Click to expand...
Sounds good. So by saying that you do think it is brom but maybe a different synthesis? Or do you think it is another kind of benzo? just wondering.
 
Bet. Yeah in the past I definitely read deschloroetizolam to page 25 or so and it really didn' do much. But at that time I was reading a shit load of c-lam and flualp magazines. lol.
 
Strength said:
I'm reading bromonordiazepam today I'm about 30 pages in. No noticeable effects yet but I just started reading 10 min ago so we'll see
Click to expand...
I personally do not care for reading bromonordiazepam that much. I do LOVE reading f-pam however.
 
You must log in or register to reply here.
Drugbuyersguide Shoutbox
  1. P @ peyton123: Do not buy from rhodium exit scam
  2. L @ Layne_Cobain: @The Doctor RC word I hear yah frustrating when expected delivery date just keeps passing and updates to the following day but is what it is I guess 🙏
  3. Hankhill @ Hankhill: saturn is my go to but i wish they had more variety
  4. Finger-of-God @ Finger-of-God: u5ps handles our shipments just fine. 200+ daily, just have to split them up to different locations.
  5. The Doctor RC @ The Doctor RC: Well you know UxPx can't handle the amount of priority mail and FDX is having trouble with business so now they help UxPx handle like a certain percentage of priority mail as far as transportation from location to location
  6. L @ Layne_Cobain: UessPess tracking is agonizingly stupid 😬 😥
  7. O @ ochemdim: Agreed, apologies all. But at the same time I’ve seen articles about spray bottles that are very expensive. Paying more for less when it comes down to it. I think we should help each other out , but this may not be the spot to discuss this topic, you’re right about that
  8. L @ Layne_Cobain: @ochemdim good stuff as always bro
  9. Dr-Octagon @ Dr-Octagon: See round like a donut
  10. N @ necromedic: @ochemdim : definitely will. I feel like we should have started a thread about this. Apologies, @Admin if this was improper use of the box. Please purge, if necessary.
  11. O @ ochemdim: @necromedic ah ok interesting! Let me know what the researchers find out. The hypothesis makes sense, only thing I’d be wary of is the irritability of VG, and keep in mind, when VG and HCł are mixed, chlorôhýdrín is produced which is very irritating but that’d have to be pretty strong HÇł I believe and just washing before hand will rid the excess HÇł
  12. N @ necromedic: @ochemdim : anecdotally, especially with the way other people have prepared them with just distilled H2O and maybe EtOH or BA for sterility, I would definitely agree, and I’ve wondered if that it’s due to the speed of drainage with such a low weight solvent. That’s why I’ve experimented with adding VG to increase viscosity to let it hang in the NM a little longer. Possibly more diffusion/osmotic pressure with a dry vs hydrated medium?
  13. O @ ochemdim: @Royboy88, @Layne_Cobain, @necromedic in a couple research papers I’ve read, they always found that the sprays had lower absorption rates compared to traditional. I could be wrong but I’d research it if I were doing a study and needed references
  14. L @ Layne_Cobain: @Royboy99 never got to try one of those saline sprays but a snuff bullet is a great compromise love mine Amazon has good ones for cheap
  15. N @ necromedic: @Royboy99: I’ve just held on to one, rinse it with EtOH and refill with saline and VG. You can find the devices, dirt cheap, on a lot of sites.
  16. ms3031 @ ms3031: Anyone ever tried MDBD?
  17. R @ Royboy99: Since C and R are gone sadly are there any vendors that offer ❄️ (c) misters , those were so convenient
  18. tiquanunderwood @ tiquanunderwood: Yeah, be smart, do your research.
  19. M @ meepmoopmeep: is it the high prices from dropshippers? i tend to avoid the obvious dropshippers for that reason
  20. M @ meepmoopmeep: @PlainPasta sorry, but I’m not understanding the issue at hand
Back
Top