Albion still a vendor running with good service

Status
Not open for further replies.
I wonder if this is why he's not on the verified list.  I can't find a bad order from him.

 
I wouldnt put too much weight on what they consider "blacklisted" or "approved" vendors...i seen several good vendors (certainly not scammers) on the blacklist (ie: neev, lysergi and smokeys) and some vendors ive never heard of before of the "approved" vendors list. I think you have to pay/"donate" to be an  "approved" vendor. So take all categorisation with a grain of salt, you should really do you own homework on each vendor...

 
Hes been around for over 2 years and just recently started doing the discount for review gimmick. Plus Its 15% off your next order, i dont think that would skew the reviews, i mean why would they even order again to be eligible for the discount/leave a positive review if it wasnt a positive expirence.

 
Last edited by a moderator:
Chud666 said:
@Mohawk@LookingForRCs naw I hope it's MXPr / 3-MeO-2′-Oxo-PCPr.. that's shit I want to try. But some o-pce is better then 3-ho-pcp.imo shit just seen u put that my bad
Click to expand...
Lab's  benchmark has always been MXE and always will be, but all of them have their place ...   O-PCE  second favorite -- pretzel salt psych-ward batch circa 2017  -- terrifyingly good, but now new synths leave technician  quite chilly.   Lab has acquired MXPr  from 3 over the hill and far away sources and  aborted research after 5  days because of complete disappointment  / disinterest and  lack of any economic practicality.    Technician was found trying to 'will'  a positive experience from  the new material -- past experience has shown that when results are down to 'wishing' and 'hoping'  -- further research makes no sense.     Both duration and strength were noted weaknesses.     Lab feels same about 2-FDCK -- once in a blue moon is fine ... OK,  maybe every 4th full moon ...  3-HO-PCP, still in lab's good graces.  

 
Mohawk said:
Lab's  benchmark has always been MXE and always will be, but all of them have their place ...   O-PCE  second favorite -- pretzel salt psych-ward batch circa 2017  -- terrifyingly good, but now new synths leave technician  quite chilly.   Lab has acquired MXPr  from 3 over the hill and far away sources and  aborted research after 5  days because of complete disappointment  / disinterest and  lack of any economic practicality.    Technician was found trying to 'will'  a positive experience from  the new material -- past experience has shown that when results are down to 'wishing' and 'hoping'  -- further research makes no sense.     Both duration and strength were noted weaknesses.     Lab feels same about 2-FDCK -- once in a blue moon is fine ... OK,  maybe every 4th full moon ...  3-HO-PCP, still in lab's good graces.  
Click to expand...
Oh so the o-pce is not like the one that looked like pretzel salt back in the day? 

 
Ad988910 said:
Hi, is there any chance you could send me the name of the vendor 
Click to expand...
I recently ordered from albion and was very impressed. I got the 4-fea,  2fdck, and aco-dmt. Honestly,  the 4-fea was a waste of money, but the other 2 were good quality and shipping was absurdly fast. All in all im already thinking about my next order.

 
Nachomomma said:
I recently ordered from albion and was very impressed. I got the 4-fea,  2fdck, and aco-dmt. Honestly,  the 4-fea was a waste of money, but the other 2 were good quality and shipping was absurdly fast. All in all im already thinking about my next order.
Click to expand...
My research indicated that the 4-fea might be a dud for some. Hopin to try the other 4f n will let u know.

 
I saw that, I was just wondering if they offered any other discounts.

Thanks for answering so quickly. i'm just about to order

 
Review . 10/10 got what I ordered in 4 days from order . Quality 10/10 . Couldn't ask for anything to be better . Gonna be using them 

 
Status
Not open for further replies.
Drugbuyersguide Shoutbox
  1. Clash283 @ Clash283: @Admin would mind reading my message regarding the shout box context?
  2. LW815 @ LW815: This probably isn’t a discussion for the shout box but in hopes to prevent something harmful from happening - volumetric solutions are the only truly safe way to ensure DIY jobs are properly, evenly mixed. Anything else short of proper equipment can and almost surely will result in inconsistency. Though I guess if you had the patience and means to properly weigh each individually that could also ensure proper measurement per thing you’re making
  3. Professor_ @ Professor_: Good Morning Everyone
  4. O @ ochemdim: @The Doctor RC yeah no 🚩. Bunches of people have food processors in their kitchens. Some do a great job at mixing. It really depends on what you’re wanting to create. For example,cl0br0maz0ļam caps with ~15% difference between them would be massive in terms of ëffects. 1o0 mġ g@bapëntins on the other hand, not so much. There will be hot spots with a good processor though. Farm@ mixers are on another level, but also very expensive
  5. The Doctor RC @ The Doctor RC: @ochemdim but shah could do it without raising a R3d FL4G? A high-grade food processor runs very quickly and if you let it run fast enough, I mean it gets that stuff mixed up pretty damn good..
  6. O @ ochemdim: @The Doctor RC not a bad idea in theory and not having a p1ll pre$$ hanging out is always a good idea. But a food processor isn’t going to cut it if you’re going for p0tëncy consistency in the theoretical caps. Farm@ companies use wayyyyy more intensive and expensive mixing equipment to get homogeneous caps.
  7. The Doctor RC @ The Doctor RC: @Perfect Meds Thanks for the welcome brother
  8. The Doctor RC @ The Doctor RC: So I had this idea of creating something called capsule kings so like instead. Instead of pr355ing bars I would use color coded capsules. A food processor would mix anything pretty much almost perfect so I would just need to find some form of p0wd3r that has no effect to add some weight to it. Does anybody have any thoughts on it?
  9. L @ Lstnfunpaintr: Any body hear tried this 3 meo 2 oxo pcp that’s popped up ?
  10. ms3031 @ ms3031: @Sinnin no idea. My chemistry knowledge is limited but I have tried what was called Tilldin in the US that is what the EU/ Asia variation for Tillidin and it was dec but for sure but I keep hearing reviews in activity, most written by heavy opioid users but I am not one. I don't believe it is though, but I have t done much reading on it
  11. Clash283 @ Clash283: Keep strivin yall, in 24 hours I had my GOOD ex hitting me up, school set up, etc.... dont give up 5 minutes before the miracle happens! back to the hustle! Stay safe and thank you to all who ive been around! Yall know.
  12. Sinnin @ Sinnin: @ms3031 isn't that basically just a racetam?
  13. ms3031 @ ms3031: Quick group question please, ya or nay, on buying any current notrillidine
  14. P @ Perfect Meds: @The Doctor RC appreciate you coming through as a Ruby Sponsor! Glad you’re part of the crew.
  15. xenxra @ xenxra: monero sale won't last much longer, get it while supplies last
  16. The Doctor RC @ The Doctor RC: New Ruby Sponsor here. Just wanna say hi and thanks for the welcome!
  17. CalFresh @ CalFresh: Happy Monday everyone! Hope it was a good day for y'all! One down, four to go!
  18. hiTillidie @ hiTillidie: Thank you pharma Daddy. Very kind
  19. Y @ Yaugae5121: Aw man walk hard is my favorite movie from that era although joe dirt is incredible and has such a good message. Walk hard soundtrack is so good too lol John c reily is the best
  20. LW815 @ LW815: With or without the scooter stick was a daily staple in me and my buddies conversations for years. We’d just throw it in any sentence where it would make sense lol
Back
Top