Glad to be here...

Joined
Jan 24, 2020
Messages
5
Hello.  Its great to be part of this community!  I've been looking for a while for a reliable place to find 1P-D or 1cp microd0se vendors.  I've seen a couple of vendors that provide regular d0ses but not micr0.  Any guidance would be very appreciated. 

 
Welcome aboard and we are glad to have you here as well! If you haven't already please familiarize yourself with the forum rules and read the FAQs as that will answer a lot of general questions you may have about the forum.  As far as the microd0s3 question, your best bet may be just buying what's available and splitting by hand into the dosage you are looking for. 

 
Welcome aboard and we are glad to have you here as well! If you haven't already please familiarize yourself with the forum rules and read the FAQs as that will answer a lot of general questions you may have about the forum.  As far as the microd0s3 question, your best bet may be just buying what's available and splitting by hand into the dosage you are looking for. 
Can you be sure each dose is the same? Don't know how rc is done. But cid can be dried upright and the bottom will be stronger than top. Or is that a myth?

 
There's many variables that alter the precision of bl0tt3rs but this lack of precision would also exist in the microdosed bl0tt3rs you would potentially be buying.  Most everyone i know x-acto cuts for microdsing, tho volumetric dosing using liquid is the ideal, and is essential if you are looking for the exact mcg per dose.  Hopefully people with more experience will see this and chime in with their experience/knowledge....

 
Last edited by a moderator:
@DoomKitty not micro myself. But read a little about people going work on it. I would think knowing exactly what you do is essential in the work place. Could imagine being in a meeting and you notice your bosses nose start to grow and start laughing if it was a bit more then expected.  

 
My understanding is that volumetric dosing is the best and most accurate way to go. Depending on where you get your bl0tt3r, some of it is likely dosed volumetrically as well(though that’s just a guess. I know how a person at home might go about laying their own bl0tter, but I’ve no idea how big commercial operations operating l3gally do it). Anyhow I’ve never tried it myself, but people seem to get consistent enough results using that method. You don’t have to be precise down to the last ug. TBH you’d probably be fine just cutting up your t@bs as Doom Kitty said.

 
I would think you could take a 100 ug blotter, mix it with 10mL vodka (or distilled water, I imagine it would keep better in vodka), let it sit for a few days........shake it up before dosing to ensure accurate distribution of the compound in the mixture, each mL would be 10ug. Something like that, adjust your math as necessary if you want more or less dilute solutions. Draw up with an oral syringe or however you want to do it. 

 
Drugbuyersguide Shoutbox
  1. Z @ zdaBa: <3 from EC
  2. xenxra @ xenxra: y'all
  3. D @ drdso: It's scary now fr. I'm guessing we're gonna see a lot of exit scammers for former "reputable" veteran vendors. These tariffs/supply chain issues are causing them not to receive product due to seizure/denial. At a certain point they gotta get there money somewhere. Just be careful who you buy from y'all
  4. T @ timyboy: How ya'll doin
  5. D @ dichlorodavid: Ah thanks for the clarity on the strike. I wasnt aware that this is cont'd from the 2024 strike. Hope they reach terms this time (quickly!)
  6. CnC5 @ CnC5: @hotdog45 thanks brother right back at you!
  7. P @ psychedpsych: @hotdog45 thanks brother you too!
  8. H @ hotdog45: Hey really hoping everyone is doing well. Just want to send my love to you all
  9. xenxra @ xenxra: good luck
  10. xenxra @ xenxra: i'm surprised none of the CA-US shops have a notice up about it
  11. Alkazar @ Alkazar: It is really annoying\
  12. Alkazar @ Alkazar: Technically they were forced back to work the last time they went on strike in 2024, so this is the same strike for the same reasons in 2025.
  13. Alkazar @ Alkazar: I dont know how to direct reply to people on here. But the Canada Post strike will affect any mail coming from the US. It will be held at a facility until the striek is over. Mail that is being sent from CAD to the US will just not be picked up. It all has to be private delivery services now.
  14. Z @ zdaBa: Happy Saturday, love you all <3
  15. CnC5 @ CnC5: @Flydaddy5000 Welcome Friend glad you like it here DBG is definitely a great place!
  16. CnC5 @ CnC5: Good Morning DBG i hope you're having a great weekend so far!
  17. Flydaddy5000 @ Flydaddy5000: I’m starting to dig this place and some of the folks in it! Not gonna lie I was sooo skeptical about this place until I wasn’t. Donate and you won’t be pissed off. I
  18. xenxra @ xenxra: @LW815 from my experience, CP strikes usually tend to leave the snails alone
  19. xenxra @ xenxra: I hardly knew her!
  20. C @ Callmejonah: methadone
Back
Top