Glad to be here...

S

steve_austin999

Member
Joined
Jan 24, 2020
Messages
5
Hello.  Its great to be part of this community!  I've been looking for a while for a reliable place to find 1P-D or 1cp microd0se vendors.  I've seen a couple of vendors that provide regular d0ses but not micr0.  Any guidance would be very appreciated. 

 
Welcome aboard and we are glad to have you here as well! If you haven't already please familiarize yourself with the forum rules and read the FAQs as that will answer a lot of general questions you may have about the forum.  As far as the microd0s3 question, your best bet may be just buying what's available and splitting by hand into the dosage you are looking for. 

 
DoomKitty said:
Welcome aboard and we are glad to have you here as well! If you haven't already please familiarize yourself with the forum rules and read the FAQs as that will answer a lot of general questions you may have about the forum.  As far as the microd0s3 question, your best bet may be just buying what's available and splitting by hand into the dosage you are looking for. 
Click to expand...
Can you be sure each dose is the same? Don't know how rc is done. But cid can be dried upright and the bottom will be stronger than top. Or is that a myth?

 
There's many variables that alter the precision of bl0tt3rs but this lack of precision would also exist in the microdosed bl0tt3rs you would potentially be buying.  Most everyone i know x-acto cuts for microdsing, tho volumetric dosing using liquid is the ideal, and is essential if you are looking for the exact mcg per dose.  Hopefully people with more experience will see this and chime in with their experience/knowledge....

 
Last edited by a moderator:
@DoomKitty not micro myself. But read a little about people going work on it. I would think knowing exactly what you do is essential in the work place. Could imagine being in a meeting and you notice your bosses nose start to grow and start laughing if it was a bit more then expected.  

 
My understanding is that volumetric dosing is the best and most accurate way to go. Depending on where you get your bl0tt3r, some of it is likely dosed volumetrically as well(though that’s just a guess. I know how a person at home might go about laying their own bl0tter, but I’ve no idea how big commercial operations operating l3gally do it). Anyhow I’ve never tried it myself, but people seem to get consistent enough results using that method. You don’t have to be precise down to the last ug. TBH you’d probably be fine just cutting up your t@bs as Doom Kitty said.

 
I would think you could take a 100 ug blotter, mix it with 10mL vodka (or distilled water, I imagine it would keep better in vodka), let it sit for a few days........shake it up before dosing to ensure accurate distribution of the compound in the mixture, each mL would be 10ug. Something like that, adjust your math as necessary if you want more or less dilute solutions. Draw up with an oral syringe or however you want to do it. 

 
You must log in or register to reply here.
Drugbuyersguide Shoutbox
  1. st1ckyf1ng4z @ st1ckyf1ng4z: ^^^ @PlanetExpress ^^^ ima def peep your bookstore but as @luquitoad mentioned, be careful advertising here. mods don’t like it for obv reasons. I’ll dm you tomo tho pimp
  2. L @ luquitoad: ****PSA**** don't store your dope in the oven!
  3. Thebeezneez @ Thebeezneez: Rick and Morty time
  4. Thebeezneez @ Thebeezneez: Whew. 2mg of bars with a hit of ketamine. Got men feeling grooving :) :cool:
  5. PlanetExpress @ PlanetExpress: @st1ckyf1ng4z Stop by and find out why we are one of the best around for years now :)
  6. st1ckyf1ng4z @ st1ckyf1ng4z: @PlanetExpress quite the selection you have there sir
  7. PlanetExpress @ PlanetExpress: What kind of powder we talkng about here?
  8. st1ckyf1ng4z @ st1ckyf1ng4z: don’t we all @thatguywithno
  9. T @ thatguywithno: needing good powders source
  10. L @ Layne_Cobain: Go to the bottom of the page and hit contact us, the admins should b able to get it off for you
  11. th3k1d @ th3k1d: Anyone know how long it takes / how to take the new memeber posting restrictions off? I made my account years ago, it's not new, and i've donated to sapphire. It's not a big deal but it would be cool to be able to be more active in conversations when my replies arent posted back for 24-36 hours, lol
  12. MorfineOrfan @ MorfineOrfan: Another monday ladies and gents, we did it....lol have a good week!
  13. MrFuszy @ MrFuszy: Anywhich Way what you up too candy
  14. MrFuszy @ MrFuszy: If I was being irrational and foolish and others laced me up about it, its, well its either admit it and do your best not to repeat the negative behavior 9
  15. MrFuszy @ MrFuszy: Oh my mannorisms
  16. MrFuszy @ MrFuszy: Im afraid I don't know what you mean?
  17. MrFuszy @ MrFuszy: ?
  18. C @ Candyshop: ⚜️⚜️⚜️⚜️⚜️that's 💯Mr Fuszy admit when your a wrong a coward never does big shit out
  19. MrFuszy @ MrFuszy: I dm you sticky, I apologize yall I was outta line. Got tol fuled for my own good.
  20. Thebeezneez @ Thebeezneez: Froggy**
Back
Top