Saturn Calibration

[F33n]

UI'm


Lab did receive the 5g pack. It's mushy, solid, and not crystalized unlike the other batches. But we should be able to work with it just they considering we do PG solutions. We're just worried about it not dissolving as well. We have a magnetic stirrer, probably will just need more hot baths than normal. Could try crushing it up a bit too.

Fast delivery. Product weight is great. Customer service was great.

You might want to try heating up some distilled water first and letting the avi soak in it for a bit before adding it to the pg. That should “loosen” it up and make it much easier to work into a pg solution with the mag stirrer.

 

[Yaugae5121]

In my opinion, Saturn doesn’t owe anyone anything for the Nortil having minimal effects. This is not a Saturn Meds-specific issue. It seems to be across the board regardless of vendor.

Coming here and acting like Saturns Meds somehow is liable to refund them because they purchase a brand new batch of a brand new RC, with next to no user reports (up until VERY recently), are being completely unreasonable. There’s got to be a level of accountability that is assumed. This is not something well researched with an accepted profile of effects, like 0D$MT for example.

At the end of the day, you’re buying a brand new Research Chem. Risks like this come with the territory, plain and simple. Even results from one batch to the next can differ exponentially (ex: pre-2024 4-Me-TMP vs post-2024 ‘citrus’ 4-Me-TMP). Tolerance to other mags of the same or similar genre also come into play and make it increasingly difficult to know if it’s a batch issue, product issue, or user issue.

If someone doesn’t want to risk buying a less than stellar product, then wait a few months until there’s some consensus on the efficacy and dose range.

However. I do applaud Saturn for their customer service and being so open to hearing their clientele out and inviting feedback both positive and negative alike.

-MB

This exactly. I reached out bc he asked but that being said I absolutely do not expect anything, what are ya gonna do and we all know in this game it happened.

All that being said too, that is bad ass customer service and would absolutely lead me to have an even higher opinion of them. Solid all the way around btw

 

[tiquanunderwood]

You might want to try heating up some distilled water first and letting the avi soak in it for a bit before adding it to the pg. That should “loosen” it up and make it much easier to work into a pg solution with the mag stirrer.

So you're saying just add the av1z powder to a little warmed distilled water (maybe 10-20%), then the rest PG? (Assuming we're making a 1 gram per 90 ML solution)

But yeah, love this vendor. They didn't have a 5 gram option and custom made it for us. Rather than getting (1) 2 gram and (1) 3 gram, they hooked it up. Much love for the fair prices Saturn Calibration.

 

[tiquanunderwood]

Weighing in on the nortil I was the one who posted that thread on /r/opiateRCs about the 100mg sample seemingly being inactive. Attributed it to the daily use of mmt but it seems that the Chinese fucked up or something. This plus my avizofone seemingly not working leaves me very sad. All was researched within 24 hours with seemingly no results. Saturn had offered to make it right with sending another g of avizofone but I'm worried about getting the same results.

Man, I've ordered now 10+ grams of av1z from them and all have been on point. I received a 5G solid, crusty bag today, but they've always sent the crystallized version prior to it being exposed to dry air. But it's the same shit. If you're using something like cl0br0maz0lam, then it won't effect you the same way due to tolerance.

Much love! All love meant!

 

[tiquanunderwood]

Saturn, any chance on br0mo0nordiazeman? My FAVORITE. I'll buy you out. But I know the Chinese vendors want a shitload minimum purchase.

 

[F33n]

So you're saying just add the av1z powder to a little warmed distilled water (maybe 10-20%), then the rest PG? (Assuming we're making a 1 gram per 90 ML solution)

But yeah, love this vendor. They didn't have a 5 gram option and custom made it for us. Rather than getting (1) 2 gram and (1) 3 gram, they hooked it up. Much love for the fair prices Saturn Calibration.

Yeah heat up the water to like 130-140f in the microwave and add the sticky/solid avi to it. It should break it down into a workable product then add it to the pg and pop it on the mag stirrer and let that baby rip. Otherwise it’ll take forever for it to dissolve in pure pg when it’s clumped like that even with the stirrer on full blast.

 

[giantsquids]

Hey guys, Cash App has now been restored as a payment method! P2P transactions are now accepted again for payments. Finally!

 

[giantsquids]

Saturn, any chance on br0mo0nordiazeman? My FAVORITE. I'll buy you out. But I know the Chinese vendors want a shitload minimum purchase.

Hey, yeah this has definitely been looked into recently. I will post an update here about that one hopefully soon. As far as the @viza goes, I'm hoping your research went well but if there were any issues at all please reach out Lybbestre@proton.me
I'm happy to offer you a re-ship once the new batch arrives. It's very frustrating that the last of that batch started turning sticky once it reached room temp. Let me know! Thanks

 

[giantsquids]

@CarminePud Hey wanted to let you know that Cash App is finally reinstated as a payment method again.
I know there were a few others that were asking about this too.


Also, thank you to everyone for the feedback regarding the Nort. Right now due to the very mixed feedback, it's been decided that Saturn will not be re-stocking it in the future however for those of you that had positive feedback, it will remain available on the site. Thank you guys so much for taking the time to let us know your thoughts about this very new chem.

 

[fyjclol]

Hey guys, Cash App has now been restored as a payment method! P2P transactions are now accepted again for payments. Finally!

Fuck yeah! Ngl thats so much easier than crypto lol. Placing order #5 you guys are legit thank you.

 

[domanby]

I agree. Plus doesn’t Saturn do 100 mini page cheap samples? Probably better to get that first of it’s a brand new product with no info about it.

Man I wish I'd known that it was so new, I ignorantly acquired about $500 worth instead of my usual go to (as its oos everywhere) thinking it had been out for a while and the general info on Google made it sound great, mine shows up tomorrow and I unfortunately am not willing to be the guinea pig. My mistake for not doing more research as this researcher is likely to be in a significant amount of pain if he can't find an alternative in the next week or so. My fault for always expecting the best results only for them to possibly be shattered. This is in no way vendors fault, this is mine for getting too angsty and grabbing the first thing that looked like good research. Still hopeful its just some shill who was trying to get more product by making up some story and I suppose that's the narrative I'll try to keep telling my brain. If anyone at all gets theres and researches it please remember to give us an update on here so we can know what to expect.

 

[domanby]

Man I wish I'd known that it was so new, I ignorantly acquired about $500 worth instead of my usual go to (as its oos everywhere) thinking it had been out for a while and the general info on Google made it sound great, mine shows up tomorrow and I unfortunately am not willing to be the guinea pig. My mistake for not doing more research as this researcher is likely to be in a significant amount of pain if he can't find an alternative in the next week or so. My fault for always expecting the best results only for them to possibly be shattered. This is in no way vendors fault, this is mine for getting too angsty and grabbing the first thing that looked like good research. Still hopeful its just some shill who was trying to get more product by making up some story and I suppose that's the narrative I'll try to keep telling my brain. If anyone at all gets theres and researches it please remember to give us an update on here so we can know what to expect.

Anyone know of a product in the same class as odsmt that researches well thats on Saturn? (Im super impressed by their ship speed and overall way they portray themselves, the site and communication puts me at ease so id rather use them as a vendor).

 

[etizoman]

Don’t send straight from an exchange, for your own sake and theirs. Get a self-custodial and send from there, idk what the rates on the one you mentioned are like but on Ex°dus/C@k£ you can change the sat/byte to whatever you want - meaning you get charged fees as low as cents(just make sure not to try to send while still in process of receiving as it’ll charge you out the ass) so even if you pay a hefty fee to send from your original you can go lighter on the self custodial. I think most that use the function we know from these sites require 2-3 s/b which is the lower end so it doesn’t add much, and still confirms in usually 20-30 minutes max.

Fucking this... you said it sooo well!

I use c@ke and it works like a charm. Usually I use ltc since the fees are just a couple of cents usually lol.

To everyone in general: Using an external wallet is the same idea as cleaning your coins. They track ya I believe if you send it direct from an exchange iirc. (Could be wrong...)

 

[gjgoforth02]

Saturn or giant squid you all have done awesome but I have paid you or what I owed you and paid for the package that needed sent out can you please get a hold of me

 

[tiquanunderwood]

Saturn or giant squid you all have done awesome but I have paid you or what I owed you and paid for the package that needed sent out can you please get a hold of me

People so impatient lol

 

[tiquanunderwood]

Yeah heat up the water to like 130-140f in the microwave and add the sticky/solid avi to it. It should break it down into a workable product then add it to the pg and pop it on the mag stirrer and let that baby rip. Otherwise it’ll take forever for it to dissolve in pure pg when it’s clumped like that even with the stirrer on full blast.

Appreciate you a lot man. Already have about 3 grams made up from last batch. But I'll give this a try when I get some more PG next week. It's sraight up rocks haha.

And I appreciate that giant(Saturn). I'm sure everything will be fine.

 

[tiquanunderwood]

Appreciate you a lot man. Already have about 3 grams made up from last batch. But I'll give this a try when I get some more PG next week. It's sraight up rocks haha.

And I appreciate that giant(Saturn). I'm sure everything will be fine.

mag stirrers ftw

 

[tiquanunderwood]

Hey, yeah this has definitely been looked into recently. I will post an update here about that one hopefully soon. As far as the @viza goes, I'm hoping your research went well but if there were any issues at all please reach out Lybbestre@proton.me
I'm happy to offer you a re-ship once the new batch arrives. It's very frustrating that the last of that batch started turning sticky once it reached room temp. Let me know! Thanks

Yeah i don't foresee it being a huge issue, maybe just a little but more time on the mag stirrer. I'll warm it up in a little distilled water (as poster above said), then dump that in my slightly preheated PG beaker. I have plenty made on hand right now, so I probably won't be making these solutions for another week or so. Hopefully the solution will be like 20/80 water/pg. If anyone else has any recommendations on the concentration let me know. We've had zero problems getting the av1z in straight up PG. Just takes 10 minutes.

and that would be SICK about the br0m0n0r. I'm getting a boner thinking about it.

I'll document the 5G batch all just in case I'm REALLY having an issue. This chem has been a godsend.

Much love Saturn!

 

[SnailyD]

has anyone else read the nort yet? It’s coming tomorrow for me ? Want to know how many pages to start at?

 

[F33n]

Yeah i don't foresee it being a huge issue, maybe just a little but more time on the mag stirrer. I'll warm it up in a little distilled water (as poster above said), then dump that in my slightly preheated PG beaker. I have plenty made on hand right now, so I probably won't be making these solutions for another week or so. Hopefully the solution will be like 20/80 water/pg. If anyone else has any recommendations on the concentration let me know. We've had zero problems getting the av1z in straight up PG. Just takes 10 minutes.

and that would be SICK about the br0m0n0r. I'm getting a boner thinking about it.

I'll document the 5G batch all just in case I'm REALLY having an issue. This chem has been a godsend.

Much love Saturn!

You can actually make it more concentrated with h2o compared to pg. I believe I read it can be 30+mg/ml in h2o. Even if you used like 70% h2o and 30%pg it will still have its bacteria killing effects of the pg. You got enough of it to experiment a little lol.