MD pihp... Any reports?

Technique matters too. It's not just something I just torch with a lighter and it becomes this perfect liquid I roll around.

Before I even add any powder in, I heat different spots on the bottom and the side.
Take the flame away.
Add the powder. Roll the piece around some. It should be hot enough that it sticks but not so hot it's vaping.
At this point the piece should be more or less thinly coated with powder in the bulb.
Flame and roll and then just poof a big cloud of vape just happens at once.

50mg is the biggest I would do like this.
Technique is huge for sure but the freebase has thicker clouds, smoother effect and doesn’t burn easily like the HCL which still works for sure just the FB form has a few pluses over HCL
 
Technique matters too. It's not just something I just torch with a lighter and it becomes this perfect liquid I roll around.

Before I even add any powder in, I heat different spots on the bottom and the side.
Take the flame away.
Add the powder. Roll the piece around some. It should be hot enough that it sticks but not so hot it's vaping.
At this point the piece should be more or less thinly coated with powder in the bulb.
Flame and roll and then just poof a big cloud of vape just happens at once.

50mg is the biggest I would do like this.

There's no technique short of alchemy that could fix whatever I had lol. I kinda wish i'd have tried to freebase it more but it's never been a game changer for me with pyrros, and it wasn't worth a damn through other R.O.A.s.
 
Once i get my fiver of MDpihp ill try it IV rectal, freebased and oral and report back end of april
 
Technique is huge for sure but the freebase has thicker clouds, smoother effect and doesn’t burn easily like the HCL which still works for sure just the FB form has a few pluses over HCL
Can you put the freebase in vapejuice easily?
 
Can you put the freebase in vapejuice easily?
I doubt mdpihp freebase would work well for vape juice. I’ve had pretty good success with 3fpihp after washing and have been able to get it to around 400mg/mL compared to apihp which i was maxing out around 700mg/mL before these compounds freeze or solidify and needs heat to stay liquid. I know mdpihp is stronger but I’d be willing to bet the 3f will be more effective than mdpihp free base in vape juice. I honestly think hardest hitting way I got from apihp was a mesh coil vape mod and omg what a game changer….maybe perfect temp large dab under right circumstances could be a close tie. It’s same with strong 3fpihp vape juice. More effective than OB which I could go on for days about techniques for bigger clouds with those but getting off topic lol hope this helps a little bit? Maybe?
 
I have A-PIHP
I wasn't going to say anything but I can't seem to let this go...
This was posted here 4/11/24 after I subscribed to the mag that shipped on 3/29/24.
I was told that this particular category was unavailable so they sent a substitute for my review--without consulting me, I may add.
I'm fairly easy going though, and just rolled with it.
It kind of stirs some feels though that I was told it's out of stock, but yet it was still listed on product lists AND posted that it was in stock. I have receipts of this information.
When I inquired about restock of my interests I was told the lab is closed...
So... do with this info what you will. I needed to get if off my chest though
 

Attachments

  • Screenshot_20240424_030646_Docs.jpg
    Screenshot_20240424_030646_Docs.jpg
    520.7 KB · Views: 28
I wasn't going to say anything but I can't seem to let this go...
This was posted here 4/11/24 after I subscribed to the mag that shipped on 3/29/24.
I was told that this particular category was unavailable so they sent a substitute for my review--without consulting me, I may add.
I'm fairly easy going though, and just rolled with it.
It kind of stirs some feels though that I was told it's out of stock, but yet it was still listed on product lists AND posted that it was in stock. I have receipts of this information.
When I inquired about restock of my interests I was told the lab is closed...
So... do with this info what you will. I needed to get if off my chest though
Don’t feel too bad bro I got ripped off also by a vendor here we gotta do deeper research on a vendor before making a order smfh
 
I wasn't going to say anything but I can't seem to let this go...
This was posted here 4/11/24 after I subscribed to the mag that shipped on 3/29/24.
I was told that this particular category was unavailable so they sent a substitute for my review--without consulting me, I may add.
I'm fairly easy going though, and just rolled with it.
It kind of stirs some feels though that I was told it's out of stock, but yet it was still listed on product lists AND posted that it was in stock. I have receipts of this information.
When I inquired about restock of my interests I was told the lab is closed...
So... do with this info what you will. I needed to get if off my chest though
Wait did you actually get the a-PHP instead??
 
Wait did you actually get the a-PHP instead??
No, I got Hex. Initially he sent .58g. I emailed to inquire about the volume of the product and why it was Hex. He corrected it by sending me additional product. Also Hex, not PHP or PiHP
 
No, I got Hex. Initially he sent .58g. I emailed to inquire about the volume of the product and why it was Hex. He corrected it by sending me additional product. Also Hex, not PHP or PiHP
Oh damn nevermind lol, good on you for being civil about it because I would be losing my shit lol.
 
I was excited to try MD-PiHP from LFRC but its been stuck at customs for the last 3 weeks smh
 
This is MD-PiHP HCL what we loved was MDPHP freebase and apihp HCL. The only way to get the MD-PiHP HCL to vape right which I suggest using glass; water pipe preferably.

1.) crush up desired amount to powder. Say you test 250mg.
2.) Drop hot water over powder and mix till it’s a slushy consistency. I’d say use no more than 10:1 ratio of MD:Baking Soda.
3.) slowly sprinkle 15mg of soda over the wet powder. You’ll see bubbles and it will turn greenish. Stop addding soda when it becomes a light like green
4.) I CANT STRESS ENOUGH TO USE HARDLY ANY BAKING SODA
5.) add some heat to dry and it’ll taste better, hit smoother and give a better rush

Once it’s fully dry it should be a brownish color and smell very strongly of jizz
Hello.
I also have, md-pihp and I have similar problems with it as you talked about. Could you describe this homemade, freebase process in a little more detail?
 
I’ve been shooting it pretty frequently over the last six months. Ive probably gone through 50 g’s and vaped a good amount as well. To really vape it well it needs to be freebased, which is pretty easy to do. IV is excellent. The last batch I got was insane. It was better than a-pihp. It usually needs heat to dissolve well, but it is easier on the veins than a-pihp. The rush is on par with good IV coke, but the rush is a little longer lasting.
 

I have 3F-aPiHP and pre-banned a-PiHP available in stock.​


Delivery is US - US
 

Attachments

  • 77.webp
    77.webp
    62.4 KB · Views: 4
Drugbuyersguide Shoutbox
  1. Alkazar @ Alkazar: It is INSANE how doctors treat tax paying hard working people like criminals when they ask for opioids. This world just keeps getting more and more backwards. But thanks to this site to be able to find people to help when no one in the medical world will.
  2. L @ Layne_Cobain: Hang in there @Turbo259 life can be such a Fkn sludge prayers and good vibes to you and your loved ones 🙏 ❤️
  3. xenxra @ xenxra: NO ADVERTISING IN THE SHOUTBOX!!!!!
  4. T @ Turbo259: just a thank you to all here on the forum, i liekly wont be posting much, too much shit goin on in life RN and really having a hard go of handling it, trying to detach myself al little bit and change things up, i will be back, i am not gone, and i will be here to ride with DBG fam forever, i appreciate you all, all i can ask from everyone, here, chatbox, shoot me a message, please just pray, we need prayers and gods hand to help...appreciate you all and thank you to my fam...blessings
  5. SeaDonkey @ SeaDonkey: I prefer a more hands-on approach, but either way it's great to see people practicing safe reading!
  6. Telp @ Telp: Happy Monday everybody. Wishing you a great day.
  7. vqxd @ vqxd: Morning y’all, hope everyone’s doing well. CalFresh one of the absolute goats, that is all
  8. T @ timyboy: @Djmart4521 post that in his thread, in the US section
  9. xenxra @ xenxra: Rick Owen jeans you can tell by the tag
  10. CnC5 @ CnC5: @scarred14 email me about your question
  11. Djmart4521 @ Djmart4521: Finally was able to get a donation to DBG ! I just wanted to say hi to everyone and hope every one has a safe blessed day !! So happy I could contribute to a community full of people just like me !
  12. F @ freddie7776: Hope everyone is having a wonderful weekend. First time here in years.
  13. vqxd @ vqxd: Aye Cal appreciate it, same goes to you and everyone else
  14. CalFresh @ CalFresh: Wishing all a happy restful Sunday and an easy beginning to the week.
  15. R @ rhodium: xenra did you mention me
  16. R @ rhodium: @Teamgamerfood i gotchu
  17. dropsheeper @ dropsheeper: Hi All
  18. xenxra @ xenxra: no flood insurance?
  19. N @ Nottheonlyone: House got flooded total loss need to make some extra bread any ideas or help ?
  20. xenxra @ xenxra: @archencrocky rhodium
Back
Top