MD pihp... Any reports?

[Itsnotme]

Technique matters too. It's not just something I just torch with a lighter and it becomes this perfect liquid I roll around.

Before I even add any powder in, I heat different spots on the bottom and the side.
Take the flame away.
Add the powder. Roll the piece around some. It should be hot enough that it sticks but not so hot it's vaping.
At this point the piece should be more or less thinly coated with powder in the bulb.
Flame and roll and then just poof a big cloud of vape just happens at once.

50mg is the biggest I would do like this.

Technique is huge for sure but the freebase has thicker clouds, smoother effect and doesn’t burn easily like the HCL which still works for sure just the FB form has a few pluses over HCL

 

[Idlewild]

Technique matters too. It's not just something I just torch with a lighter and it becomes this perfect liquid I roll around.

Before I even add any powder in, I heat different spots on the bottom and the side.
Take the flame away.
Add the powder. Roll the piece around some. It should be hot enough that it sticks but not so hot it's vaping.
At this point the piece should be more or less thinly coated with powder in the bulb.
Flame and roll and then just poof a big cloud of vape just happens at once.

50mg is the biggest I would do like this.

There's no technique short of alchemy that could fix whatever I had lol. I kinda wish i'd have tried to freebase it more but it's never been a game changer for me with pyrros, and it wasn't worth a damn through other R.O.A.s.

 

[Idlewild]

I miss aphp so much

I think it's been like 5 years for me but who can track anymore...

 

[Idlewild]

There used to be mdphp in hcl and freebase. Hcl sucked cause it burned

Was it the same with other R.O.A.s? I've always stuck with vaping pyrros but I tried eating, snorting and boofing this stuff and got nothing.

 

[sadophyte]

Once i get my fiver of MDpihp ill try it IV rectal, freebased and oral and report back end of april

 

[Idlewild]

Once i get my fiver of MDpihp ill try it IV rectal, freebased and oral and report back end of april

God Speed

 

[PyroMania123]

Technique is huge for sure but the freebase has thicker clouds, smoother effect and doesn’t burn easily like the HCL which still works for sure just the FB form has a few pluses over HCL

Can you put the freebase in vapejuice easily?

 

[chemcabinet54]

I have A-PIHP

 

[Itsnotme]

Can you put the freebase in vapejuice easily?

I doubt mdpihp freebase would work well for vape juice. I’ve had pretty good success with 3fpihp after washing and have been able to get it to around 400mg/mL compared to apihp which i was maxing out around 700mg/mL before these compounds freeze or solidify and needs heat to stay liquid. I know mdpihp is stronger but I’d be willing to bet the 3f will be more effective than mdpihp free base in vape juice. I honestly think hardest hitting way I got from apihp was a mesh coil vape mod and omg what a game changer….maybe perfect temp large dab under right circumstances could be a close tie. It’s same with strong 3fpihp vape juice. More effective than OB which I could go on for days about techniques for bigger clouds with those but getting off topic lol hope this helps a little bit? Maybe?

 

[endingacorn91]

I have A-PIHP

I wasn't going to say anything but I can't seem to let this go...
This was posted here 4/11/24 after I subscribed to the mag that shipped on 3/29/24.
I was told that this particular category was unavailable so they sent a substitute for my review--without consulting me, I may add.
I'm fairly easy going though, and just rolled with it.
It kind of stirs some feels though that I was told it's out of stock, but yet it was still listed on product lists AND posted that it was in stock. I have receipts of this information.
When I inquired about restock of my interests I was told the lab is closed...
So... do with this info what you will. I needed to get if off my chest though

 

[Kodak1985]

I wasn't going to say anything but I can't seem to let this go...
This was posted here 4/11/24 after I subscribed to the mag that shipped on 3/29/24.
I was told that this particular category was unavailable so they sent a substitute for my review--without consulting me, I may add.
I'm fairly easy going though, and just rolled with it.
It kind of stirs some feels though that I was told it's out of stock, but yet it was still listed on product lists AND posted that it was in stock. I have receipts of this information.
When I inquired about restock of my interests I was told the lab is closed...
So... do with this info what you will. I needed to get if off my chest though

Don’t feel too bad bro I got ripped off also by a vendor here we gotta do deeper research on a vendor before making a order smfh

 

[Idlewild]

I wasn't going to say anything but I can't seem to let this go...
This was posted here 4/11/24 after I subscribed to the mag that shipped on 3/29/24.
I was told that this particular category was unavailable so they sent a substitute for my review--without consulting me, I may add.
I'm fairly easy going though, and just rolled with it.
It kind of stirs some feels though that I was told it's out of stock, but yet it was still listed on product lists AND posted that it was in stock. I have receipts of this information.
When I inquired about restock of my interests I was told the lab is closed...
So... do with this info what you will. I needed to get if off my chest though

Wait did you actually get the a-PHP instead??

 

[endingacorn91]

Wait did you actually get the a-PHP instead??

No, I got Hex. Initially he sent .58g. I emailed to inquire about the volume of the product and why it was Hex. He corrected it by sending me additional product. Also Hex, not PHP or PiHP

 

[Idlewild]

No, I got Hex. Initially he sent .58g. I emailed to inquire about the volume of the product and why it was Hex. He corrected it by sending me additional product. Also Hex, not PHP or PiHP

Oh damn nevermind lol, good on you for being civil about it because I would be losing my shit lol.

 

[endingacorn91]

Oh damn nevermind lol, good on you for being civil about it because I would be losing my shit lol.

I figured at least I got something

 

[sadophyte]

I was excited to try MD-PiHP from LFRC but its been stuck at customs for the last 3 weeks smh

 

[nine_nine_238]

Anyone try the recent batch thats going around?

 

[csekka]

This is MD-PiHP HCL what we loved was MDPHP freebase and apihp HCL. The only way to get the MD-PiHP HCL to vape right which I suggest using glass; water pipe preferably.

1.) crush up desired amount to powder. Say you test 250mg.
2.) Drop hot water over powder and mix till it’s a slushy consistency. I’d say use no more than 10:1 ratio of MD:Baking Soda.
3.) slowly sprinkle 15mg of soda over the wet powder. You’ll see bubbles and it will turn greenish. Stop addding soda when it becomes a light like green
4.) I CANT STRESS ENOUGH TO USE HARDLY ANY BAKING SODA
5.) add some heat to dry and it’ll taste better, hit smoother and give a better rush

Once it’s fully dry it should be a brownish color and smell very strongly of jizz

Hello.
I also have, md-pihp and I have similar problems with it as you talked about. Could you describe this homemade, freebase process in a little more detail?

 

[Dont think.Do]

I’ve been shooting it pretty frequently over the last six months. Ive probably gone through 50 g’s and vaped a good amount as well. To really vape it well it needs to be freebased, which is pretty easy to do. IV is excellent. The last batch I got was insane. It was better than a-pihp. It usually needs heat to dissolve well, but it is easier on the veins than a-pihp. The rush is on par with good IV coke, but the rush is a little longer lasting.

 

[chemcabinet54]

I have 3F-aPiHP and pre-banned a-PiHP available in stock.​

Delivery is US - US